sanding
polishingTimber Flooring Brisbane. Floating floor Installation. Wooden floor Installation. Timber flooring Gold Coast.
Over concrete we can:
We can also install over your existing timber floor. It is recommended that we install the new floor at 90 degrees to the old existing floor when going over the top. However if the shapes of the rooms permit, a 45 degree floor could lift the appearance of the area.
We can cut out badly damaged or missing boards and professionally replace them with new boards.
See Installation - Board Replacement
From Laminates to fully engineered Real Timber floors. We put down a Moisture barrier and then an acoustic underlayment. Then we Lay the floating floor. They are called floating floors because they are not fixed to the slab or sub-floor. The weight of the floor holds it in place. These types of floors are ideal for rented commercial premises where you are responsible for any damage to the premises. When leaving the floors can be fully removed with no damage to the premises.
There are many types of floating floors, some can be re-sanded and polishing for many years to come. (These have a 4-6 mm thick veneer on top.) Whilst others are meant for a limited life span and when worn out, should be pulled up and disposed of. These are meant for temporary shop displays etc that are changed frequently.
We can Glue:
We can supply all of these products and Install them and Sand & Finish those that are necessary Or you can supply your own floor and we can install and Finish it for you.
We are proud to be a supplier and installer of BORAL timber flooring products. Our close association with BORAL means we have the support of the industry´s leading manufacturer and supplier of timber flooring.
For all your Timber flooring needs in Brisbane, call Quicksand & Polish. We can handle the entire project, from Supply of the Timber, to it's installation, and then Sand & Finsih it with The Perfect Process.